http://WWW.GREENWATERCONCEPTS.IN
GREENWATERCONCEPTS 5a2a4b8be9ea0107781bd373 False 398 48
OK
background image not found
Found results for
'pressure drop'
Pressure Gauges INR   0 INR  0
-NaN%

Pressure Gauges

Industrial Pressure Gauges, acc. ±1.6% of F.S. Brand: Baumer All SS Pressure gauges Standard-Case & Bezel Bayonet Type Old order code ADD-2-2BM-U(0/100 psi 0/7 kg/cm²).PY Order code ADD-02-2BM-U21/PY Dimension (Diameter) 63 mm Type of mounting Direct Bottom Entry Gauge connection 1/4" BSP (M) Pressure unit psi with kg/cm² (Dual Scale) Pressure range Pressure range for psi / kg/cm² (Dual scale) 0/100 psi 0/7 kg/cm²

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Wound Polypropylene Micron Cartridge Filters INR   0 INR  0
-NaN%

Wound Polypropylene Micron Cartridge Filters

Wound Polypropylene Micron Cartridge Filters These are popular liquid filter cartridges that have a continuous, diagonally interlocking weave over a supporting core. The most popular media used for these filters is a polypropylene(PP) yarn over a PP supporting core. The winding provides tapered filter passages of controlled size and shape. The larger particles are trapped on the outer surface and form a pre-cake. The smaller particles are trapped within the torturous path of the winding. These filters work on the principle of depth filtration, offering a gradual rise in pressure drop across the life of the cartridge. Brand Hydrowound MMP is the largest manufacturer of the wound PP cartridges in India. The Hydrowound cartridges use the PP yarn manufactured by a superior technology. The yarn is fibrous and has about 40% higher air volume compared to conventional yarn. The filtration takes place by “absorption technology”. This provides for the advantages of (a) lower pressure drop (2) increased efficiency and (3) higher dirt holding capacity. Micron Rating MMP Hydrowound cartridges are offered in standard micron ratings of 0.5, 1, 5, 10, 25, 50, 75 and 100. On request, customised micron rating can also be provided. The cartridges are of nominal rating with an efficiency of 88-90%. Sizes Length: 10” / 20” / 30” / 40” Outer Dia: 63mm ( Standard Cartridge) / 114mm (Big Blue of Jumbo Cartridge) Inner Dia: 27.5 mm Ends: DOE ( Double Open Ended) / SOE ( Single Open Ended)

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Water Softener - Aqua Conditioner INR   0 INR  0
-NaN%

Water Softener - Aqua Conditioner

Aqua Conditioners Technology The Aqua Conditioners technology is unique because it: Prevents scale & also breaks down existing scale – without salts, chemicals or electricity Provides an endless supply of ‘softened’ water without further cost or maintenance What is a Aqua Conditioner system? According to some very narrow definitions, a ‘water-softener’ changes hard water into the soft water only with the removal of calcium from the water with sodium carbonate. This means the Aqua Conditioners unit is not technically a water softener as it does not add chemicals or remove any minerals from the water flow. However, it does turn ‘hard water‘ into ‘soft water’ as characteristics of the calcium molecules changes so that it does not drop out and cling to other surfaces. The Aqua Conditioners device prevents scale from forming by neutralizing the scale producing properties of the minerals in hard water. This means the neutralized mineral particles will flow freely through the system without sticking to the surfaces. What does the Aqua Conditioners technology do? The technology is designed to protect plumbing systems and other surfaces from the negative effects of hard water minerals. The scale and residue that usually sticks to pipes, valves and other surfaces is prevented from forming by changing the hard minerals in the water into inactive microscopic particles. These inactive mineral particles stay suspended in the water (much like minerals are suspended in milk) and flow freely, unable to stick to surfaces. Most importantly, unlike hard water minerals, if the inactive mineral particles occasionally drop out of suspension they can easily be washed or wiped away without the use of caustic chemicals. How does a Aqua Conditioners work? The unit is installed directly on your water line. It has at its core a non-sacrificial, catalytic converter that is non-ferrous, resists rusting and corrosion, and is totally non-toxic and ecologically safe. The unit requires no salt, no resins, no electricity, no magnets, no back washing and no maintenance. Using a unique combination of metals within the alloy core plus the principle of turbulence (the Venturi effect), the water flow is forced through the Aqua Conditioners unit where an electro-chemical catalytic reaction occurs. During this reaction, electrons are transferred between molecules, completing missing electrons and so new mineral compounds are formed. The electro-physical changes in the minerals neutralize their scale producing properties. The result is that previously ‘hard’ minerals are changed from being large molecules into inactive, microscopic mineral particles. The Chemistry Blended in a specialized foundry process, each alloy core is made up of a number of dissimilar metals scientifically selected from the anode and cathode galvanic scale. The alloy is not a sacrificial anode (ie; does not need replacement). On contact with water thousands of intense galvanic electrochemical reactions occur along the length of the alloy core. Minerals are attracted to these galvanic sites as they flow through the system. The electrical charge or zeta potential of the minerals in the water is reduced allowing the minerals to aggregate and form nano-sized colloids which remain in suspension rather than precipitate on pipes and associated equipment. Zeta potential is considered to be the electric potential of the minerals in the water. Aqua Conditioners lowers the Zeta potential of water by a factor of almost 2. Green Water Concepts India Pvt Ltd supplies Aqua Conditioner Water Softners

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Iron Removal Media - Purolite M INR   0 INR  0
-NaN%

Iron Removal Media - Purolite M

Purolite MZ10 Plus Purolite MZ10 Plus is an iron removal media that removes soluble iron, manganese, hydrogen sulfide, arsenic and radium from water supplies. In addition to its catalytic property, it also facilitates the redox reaction of iron and manganese. Purolite MZ10 Plus effectively removes iron, manganese and hydrogen sulfide from natural waters. It can even be used at high operating temperatures and differential pressures without breakdown of the media. Unlike other medias, it does not require extensive pre-conditioning. PUROLITE MZ 10 is a Manganese Zeolite, an oxidizing and filtering medium, prepared by processing glauconite, a natural product, better known as “greensand”. PUROLITE MZ 10 effectively removes from natural waters iron, manganese and hydrogen sulphide, which are of particular concern because very small amounts of any one in a water supply can seriously limit its usefulness. Water for industrial and domestic uses must be iron and manganese free. In many countries, for municipal use, iron content cannot exceed 0.2 ppm and manganese 0.05 ppm, but they should preferably be less than 0.05 and 0.02 ppm respectively. In certain industries like pulp and paper mills, tanneries and textile plants, dye houses and laundries, it is almost impossible to operate with iron or manganese bearing waters since they would produce objectionable stains, streaks, spots and off-colours on many manufactured products. Iron and manganese also foul ion exchange resins which necessitate their removal as pretreatment to most ion exchange processes. PUROLITE MZ 10 is a quite versatile product that, used in conjunction with potassium permanganate, thanks to its catalytic properties, can reduce iron and manganese in water supplies to extremely low levels. None of procedures such as aeration, chlorination and filtration can yield an effluent with the same quality as obtained with the use of PUROLITE MZ 10. PUROLITE MZ 10 has a few unique characteristics in addition to its catalytic property that provides the maximum utilization of the oxidizing agent used, such as potassium permanganate, chlorine or dissolved oxygen, which results in increasing both the rate and the completeness of the oxidation reaction. Its oxidation reduction buffered capacity, for instance, governs the length of the operating cycle on the discontinuous process and permits a safe and smooth operation when it applies to the continuous process. Just as ion exchange resins have the capacity to exchange ions, so PUROLITE MZ 10 has the capacity to exchange electrons. This means that it can oxidize iron or manganese until the supply of electrons becomes depleted. These electrons may be replaced continuously or discontinuously by the addition of an oxidizing chemical such as potassium permanganate. The nodular shape and the fine size of the granules, together with their ruggedness and durability, afford excellent filtration efficiency, even after years of continuous service. COMMISSIONING PROCEDURE • Backwash the PUROLITE MZ 10 bed with water at a minimum linear flow rate of 30 m/h (m3/h/m2) for 15 to 20 minutes or, if available, with air and water. • Regenerate the PUROLITE MZ10 bed with potassium permanganate using a regenerant level of 3 g of KMnO4 per litre of zeolite, slowly passing a 0.3% solution through the bed in 30 minutes. • Displace the regenerant solution with 1 BV of water in 30 minutes. • 4 Rinse with 5 to 6 BV of water at the service flow rate, check the absence of potassium permanganate in the effluent and start the service run. HOW PUROLITE MZ 10 WORKS PUROLITE MZ 10 is employed following two basic application techniques, the choice of which depends primarily on the level and relative amounts of iron and manganese existing in the water to be treated. When iron removal is the primary objective, generally the continuous technique is applied. On the other hand, when the removal of manganese is the primary goal, the discontinuous technique is employed. Mixed techniques can be used for large units when both iron and manganese must be reduced to very low levels. The reaction in the removal of manganese is that PUROLITE MZ 10 oxidizes the manganese salts in the water to a higher insoluble oxide and, at the same time, the higher oxides which constitute the Manganese Zeolite coating are reduced to a lower insoluble oxide. After a specified quantity of raw water has been treated, or, in other words, after the oxidation 3 capacity is exhausted, the PUROLITE MZ 10 bed is regenerated with potassium permanganate. This step returns all the lower manganese oxides to the higher oxides and the cycle begins again. A similar reaction occurs in the removal of iron, with the difference that the ferrous ions are turned into ferric hydroxides, which are then filtered out by the bed. While the discontinuous system involves periodic regenerations with potassium permanganate the continuous system requires constant addition of potassium permanganate and/or other oxidizing chemicals directly into the water ahead of the PUROLITE MZ 10 filter. The discontinuous process sequence is: backwash, regeneration with a dilute solution of potassium permanganate, rinse and return to service, all requiring about one hour. Treated water is recommended for backwashing unless the iron and manganese in the raw water are very low. To maintain the bed in a clean condition, occasional air-water washes are recommended. The continuous process sequence is: backwash, rinse, and return to service, all requiring about 20 minutes. When backwashing with treated water, this rinse may be unnecessary. HYDRAULIC CHARACTERISTICS Pressure drop of a fluid passing through a fixed bed of any granular filter medium is related to the service flow rate, and to the viscosity and the temperature of the fluid. Typical values of pressure drop for PUROLITE MZ 10 are found in the figure below. PUROLITE MZ 10 is a pretty heavy product and requires important backwash flow rates to expand the bed and free it up from any particulate matter (mostly iron hydroxides) filtered out during the service run. To be effective, the backwash flow rate must expand the bed by a minimum of 35 to 40% for 10 to 20 minutes or until the effluent is clear. The proper backwash flow rate can be determined using the figure below. Low pressure compressed air applied prior to backwash with water can help loosening the PUROLITE MZ 10 bed. THE DISCONTINUOUS PROCESS The discontinuous process shall be used when both iron and manganese need to be removed, or whenever a minimum residual manganese concentration in the treated water is to be guaranteed. PUROLITE MZ 10 is in this case regenerated with a fixed amount of potassium permanganate when the specified quantity of water has been treated. This technique is so simple, safe and effective that it is widely used for household applications as well as for large industrial water treatment units.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Alkaline RO - Blue Mount Crown UTS INR   0 INR  0
-NaN%

Alkaline RO - Blue Mount Crown UTS

Specifications Technology: Alkaline RO Technology Stages: Sediment + Activated Carbon + RO + Antioxidant Alkaline Storage: 3.2 Gallon Pressure Tank Optional, Easy to connect with water cooler & dispensers Installation: Wall Mounted or Under the Sink Application: Suitable for purification of Brackish / Tap / Municipal Water Operation: Fully automatic with Auto Cut-off Product Dimension: 16.7(L) X 8.7(W) X 12(H) inch.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Industrial RO Plants INR   0 INR  0
-NaN%

Industrial RO Plants

Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove ions, molecules, and larger particles from drinking water. In reverse osmosis, an applied pressure is used to overcome osmotic pressure, a colligative property, that is driven by chemical potential differences of the solvent, a thermodynamic parameter. Reverse osmosis can remove many types of dissolved and suspended species from water, including bacteria, and is used in both industrial processes and the production of potable water. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be "selective", this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as solvent molecules) to pass freely. In the normal osmosis process, the solvent naturally moves from an area of low solute concentration (high water potential), through a membrane, to an area of high solute concentration (low water potential). The driving force for the movement of the solvent is the reduction in the free energy of the system when the difference in solvent concentration on either side of a membrane is reduced, generating osmotic pressure due to the solvent moving into the more concentrated solution. Applying an external pressure to reverse the natural flow of pure solvent, thus, is reverse osmosis. The process is similar to other membrane technology applications. However, key differences are found between reverse osmosis and filtration. The predominant removal mechanism in membrane filtration is straining, or size exclusion, so the process can theoretically achieve perfect efficiency regardless of parameters such as the solution's pressure and concentration. Reverse osmosis also involves diffusion, making the process dependent on pressure, flow rate, and other conditions. Reverse osmosis is most commonly known for its use in drinking water purification from seawater, removing the salt and other effluent materials from the water molecules. Green Water Concepts engineers design and build tailor-made reverse osmosis plants on customs specifications. Our skid-mounted reverse osmosis plants range from tap water to brackish water and cover all type of application including drinking and process water. Green Water Concepts’ Reverse Osmosis plants are used to produce high-quality demineralised water. RO Plant is used extensively in the food and beverage industry (especially the brewing industry), pharmaceutical and the electronics industries. Green Water Concepts study the water chemistry and then select the most suitable membrane configuration in order to provide a plant which gives a high recovery rate. Further help is provided to the client to make use of, often by further treatment, of the reject water. The standard Green Water Concepts range of R O units utilizes the most modern membrane technology and consists of a modular design comprising of: • Skid-mounted epoxy-coated steel base • Spiral-wound membranes in high-pressure GRP vessels • Multi-stage high-pressure stainless steel feed pump • Control panel • Pre-filter • Pressure and flow gauges for feed, reject and permeate • Water quality indicator on conductivity alarm

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Filter Sand INR   0 INR  0
-NaN%

Filter Sand

Filter Sand is a properly graded and dried sand. It is designed to be used in swimming pool, water & waste water filtration systems, . This filter sand also features a tan color. Narrowly graded, clean, dry sand. . Rapid sand filtration is a purely physical water purification method. Rapid sand filters (RSF) provide rapid and efficient removal of relatively large suspended particles. Two types of RSF are typically used: rapid gravity and rapid pressure sand filters. Filtering water through a layer of fine sand is one of the oldest forms of filtration. Dirt particles in the water are trapped and held in the very small openings between the grains of sand. This process of coagulation enhances the filtering efficiency of sand in capturing very small dirt particles. High-rate sand filters have a filter rate of 15 to 20 gallons per minute per square foot of filter area. They also work on the basis of depth filtration. The dirt removed from the water is not collected on top of the sand bed, but is driven into the sand bed by the high velocity of the water. In a typical pool filter, the primary dirt load is confined to the top 2-4” of the sand bed. In a high-rate sand filter the dirt is collected through the total depth of the sand bed. Green Water Concepts India Pvt. Ltd is one of the largest suppliers of filter sands of different grades across Kerala.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false