http://WWW.GREENWATERCONCEPTS.IN
GREENWATERCONCEPTS 5a2a4b8be9ea0107781bd373 False 398 48
OK
background image not found
Found results for
'uv light'
UV System INR   0 INR  0
-NaN%

UV System

WHAT IS UV DISINFECTION SYSTEM AND HOW DOES IT WORK? UV Disinfection System is an extremely effective way to combat microbial contamination in water. However, microbes have to be exposed to UV-C light in the proper amount in order to effectively disinfect the water. UV Disinfection Systems are used in many different applications ranging from the purification of drinking water in individual homes to disinfecting water supply of entire townships. UV treatment for water is recognized as the safer and more cost-effective way to disinfect water for industrial applications. UV sanitization is useful in almost any application where microbial free, safe and pure water is required; and where there is a chance of the water being contaminated before it reaches the final point of use. How Does UV Disinfection System Work? UV light disinfects by penetrating microorganisms and destroying their DNA. DNA plays an important role in organisms’ functions and reproduction hence destroying the DNA prevents the organism from being active and multiplying. This UV energy (wavelength of 240-280 nm) is also naturally found in sunlight in very small quantities. The same energy is produced in stronger intensities with help of high mercury discharge lamps, commonly known as UV lamps. No bacteria, viruses, molds or their spores can survive when exposed to the correct dose of UV light. Therefore UV is considered as the best solution for water sterilization. Industrial Applications of UV Disinfection System Ultraviolet disinfection system is not simply a lamp inside a pipe. The UV Reactor must be designed to ensure that all microbes receive sufficient exposure to the UV light (dose).Based on the hydraulic properties of water; the reactor needs to be optimized to guide the flow in a manner so as to maximize residence time and boost turbulence. Well designed UV systems are producing consistently exceptional results in the industrial applications. Few Examples : Food and Beverage – UV disinfection system can help to achieve quality of water as per specifications laid down by the FDA ( Food and Drug Administration ) Bio- Pharmaceutical – Water used in Pharmaceutical and healthcare products and for CIP (Cleaning in Place) must be free of chemicals like chlorine, ozone, and pathogens. Most pharmaceutical companies depend on UV systems for water disinfection. Cosmetics – Water that is free of microorganisms and toxins ensure quality and enhance the shelf life of cosmetics. UV Sterilization is the preferred choice for the cosmetic industry across the globe. Centralized Drinking Water – A UV system is an easy, affordable solution to ensure pure water in each and every tap of your home or office. Waste Water Disinfection and Reuse – To combat the problems of water scarcity and rising cost of fresh water, UV Disinfection can help by treating the waste water in the tertiary stage. UV systems that are specially designed for wastewater can thus disinfect wastewater so that the water can be reused for secondary purposes such as flushing and gardening. Swimming Pools – Traditionally, chlorine has been in use to ensure clean water in swimming pools. However, it is increasingly being known that with chemical disinfection, chemical reacts with many other organic matters to form hundreds of new chemicals which are harmful. While UV is recognized as safer and more cost effective way to disinfect swimming pools. Benefits of UV Disinfection System Natural – UV is nature’s way of purification. Environmentally Friendly – No Toxic by-products are formed during UV disinfection process Effective – All known microorganisms are susceptible to UV light Economical – Lowest operating cost amongst disinfection systems Safe& Chemical Free – No addition of chemicals hence no danger of overdosing Fast – It is In-contact purification therefore Instant Easy to Manage – Well designed systems like the Alfaa UV systems come with many advanced features like CFD (Computational Fluid Dynamics), high-efficiency electronic ballasts, and extremely precise UV intensity monitors which make them highly effective and hence easy to manage. Does a UV Disinfection System need periodic maintenance? There can be some cases where the water is not adequately pre-treated and turbidity levels are low. In such cases, routine inspection and cleaning can be carried out every 6 months. In the case of high turbidity and hardness, the cleaning frequency might need to be increased. Finally, the UV lamp has a limited life and must be replaced once it is exhausted. In the unlikely event of premature failure of the lamp, the monitoring circuit will provide the signal to advise replacement.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Alkaline RO UV/UF purifier - Blue Mount, INR   12590 INR  12590
-0%

Alkaline RO UV/UF purifier - Blue Mount,

Technology:RO + Antioxidant Alkaline + UF + LED Display System Purification Capacity:Upto 18 Litres Per Hour Weight:7.7 kg (Approx) Product Dimension (Inch):21.1 (H) x 9.9 (W) x 16.7 (L) With Tap Storage:12 Litres Filters:Sediment , Activated Carbon , RO , Antioxidant Alkaline , UF Installation:Wall Mounted RO + Alkaline Filter Life:Approx 6000 Litres / 1 Year Filter’s Life:Approx 6000 Litres / 1 Year

INR 12590 INR 12590

Availability:True

Pay mode:COD only

view details
Online UV Purifiers - Blue Mount INR   7300 INR  7300
-0%

Online UV Purifiers - Blue Mount

Specifications Technology: Online Ultra Violet with Silver Impregnated Technology Stages: Sediment, Activated Carbon, UV, Silver Impregnated Carbon Storage: 9 Litres of purified water storage Installation: Wall Mounted / Table Top Applications: Suitable for Purification of Tap / Municipal Water Operation: Fully Automatic Product Dimension: 11.8(L) X 12.2(W) X 16.7(H)

INR 7300 INR 7300

Availability:True

Pay mode:COD only

view details
Alkaline RO UV/UF purifier - Blue Mount, Advance Star INR   17990 INR  17990
-0%

Alkaline RO UV/UF purifier - Blue Mount, Advance Star

Specifications Technology: Online RO + Antioxidant Alkaline +UV +UF Stages: Sediment, Activated Carbon, RO, Antioxidant Alkaline, UV, UF Storage: 12 Litres Installation: Wall Mounted Applications: Suitable for Purification of Brackish / Tap / Municipal Water Operation: Fully Automatic Product Dimension: 16.7(L) X 9.9(W) X 21.1(H)

INR 17990 INR 17990

Availability:True

Pay mode:COD only

view details
Online UV purifier - Blue Mount, Shine INR   5990 INR  5990
-0%

Online UV purifier - Blue Mount, Shine

Specifications Technology: Online Ultra Violet with Silver Impregnated Technology Stages: Sediment, Activated Carbon, UV, Silver Impregnated Carbon Storage: Easy to Connect with External Storage Installation: Wall Mounted Applications: Suitable for Purification of Tap / Municipal Water Operation: Fully Automatic Product Dimension: 16.7(L) X 10.5(W) X 12(H)

INR 5990 INR 5990

Availability:True

Pay mode:COD only

view details
Alkaline RO UV/UF purifier - Blue Mount Nova Plus INR   18990 INR  18990
-0%

Alkaline RO UV/UF purifier - Blue Mount Nova Plus

Blue Mount Nova Plus Under Sink RO

INR 18990 INR 18990

Availability:True

Pay mode:COD only

view details
Anthracite INR   0 INR  0
-NaN%

Anthracite

Anthracite Filter Media are filtration materials for turbidity and SS removal. Since the specific gravity is lighter than that of Filter Sand, it is much used in combination with Filter Sand in dual-media filtration, to consist reverse grain layers after backwashing. In addition, because of high content carbon of this product, it has high resistance to various chemicals and high physical strength so that it is widely used for city and industrial water purification. Features of Anthracite Filter Media 1. High void percentage and much removal capacity of turbidity and SS.  In the “Single-medium filtration” treated by Filter Sand only, small particles are placed at upper part of layer, called as “Surface filtration” that turbidity and SS are caught at surface layer part mainly, and it results in less removal capacity of turbidity and SS. By use of Anthracite Filter Media of which the specific gravity is lighter than that of Filter Sand and even bigger particles can be placed on the Filter Sand, it is possible to enlarge the removal capacity of turbidity and SS as ideal “Dual-media filtration” in combination with Filter Sand and it is widely used in many water works in Japan. Since Anthracite Filter Media, rich angular and complicated in form, have high void percentage and large specific area, “Deep bed filtration” which is effective not only at the surface but also to the depth can be realized and it is also used with single and deep layer. From these features, the filtration will be effective by use of Anthracite Filter Media as follows. * Extending filter run length to lower washing water waste and improve treated water collection. * Possible to quicken filter run length to save space for installation of equipment. * Prevention of filtration blockage due to Synedra, Microcystin, etc. * Prevention of mad ball forming at the surface of sand layer. 2. Micro-flocs growing easily.  Since the grain has complicated form and angularities, suspended solids are retained in the inter granular spaces throughout the greater part of layer depth. After addition of coagulant, the water to be treated which has been sent out the filter without agitation is agitated and generates micro-flocs while it passes through the inter granular space. It results in improvement of treated water quality. * Improvement of treated water quality. 3. Easy change from single-medium filtration (by use of Filter Sand) to dual-media filtration.  The washing method of Anthracite Filter Media is the same as that of Filter Sand. It is no need to install new washing equipment additionally in case of changing the existing filter from single-medium filtration by only use of Filter Sand to dual-media filtration by use of Anthracite Filter Media. It is possible to improve the filtration effect by removing a part of Filter Sand and fill up with Anthracite Filter Media there. * Improvement of filtration effect with reasonable budget. 4. High resistance to chemicals  Since Anthracite Filter Media of good quality contains less impurities and much carbon and it is not dissolved in acidic and alkaline water, it is suitable as filter medium and also used in the chemical industry for the filtration of brine in soda manufacturers. * Possible to use with various chemicals. 5. Being used as a carrier for bio film treatment.  Since Anthracite Filter Media have high void percentage and large specific area, bio film is easily formed on them. The medium is the most suitable not only for physical filtration but also as a carrier for bio film treatment. * High effect as a carrier for bio film treatment. Green Water Concepts is one of the largest distributor of anthracite media in kerala

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Iron Removal Media - Katalox Light INR   0 INR  0
-NaN%

Iron Removal Media - Katalox Light

KATALOX LIGHT ® is a new brand of revolutionary advanced filtration media completely developed in Germany. It‘s composition simply makes it outstanding against the contemporary filter media available in water treatment industries, like sand, BIRM, Greensand Plus, Manganese Greensand etc. KATALOX LIGHT ® is manufactured in Germany. KATALOX LIGHT ® is engineered with unique MnO2 coating technique on ZEOSORB®, providing it light weight, higher filtration surface, more service life and more reliable performance (filtration down to 3 µm) than any other existing granular filter media. KATALOX LIGHT ® is being used in numerous system for residential, commercial, industrial and municipal applications worldwide, for High level filtration, color and odor removal, Iron, Manganese, Hydrogen sulfide removal, efficient reduction of Arsenic, Zinc, Copper, Lead, Radium, Uranium and other radionuclides and heavy metals. KATALOX LIGHT ® is ANSI/NSF 61 Certified for drinking water applications and has met the ANSI/ NSF 372 Lead free compliance. Advanced use High concentration coating of MnO2 on the KATALOX LIGHT ® surface (10%) is the biggest advantage compared to any similar product available in the market. This makes the oxidation and co-precipitation of contaminants much more effective. For removal of very high concentration of contaminant it‘s recommended to use H2O2 as an oxidizer, which provides accelerated catalytic oxidation on the surface of the media. Conventional oxidizing agents like chlorine or potassium permanganate also could be used if required. KATALOX LIGHT ® can be used for Arsenic, Radium, Uranium removal but in these cases there is requirement of Iron in the water. KATALOX LIGHT ® system is designed with special iron dosing technology which has many advantages over Adsorbent media used for Heavy Metal removal. The Future The future of water treatment, as we see it, is going to give us more difficult challenges and we all need more advanced and robust products. In Watch Water®‘s vision, KATALOX LIGHT ® can be addressed for advanced concepts like Water Reuse, Controlled Adsorption of Arsenic and Heavy Metals, advanced Membrane pre-treatment, Zero-Discharge Cooling tower etc. Contact us for information. Standard Packaging: 1 ft³ bags (28 Liters); Mass: 30 kg (66 lb) 40 bags on a Pallet 16 Pallets in a container Watch Water® KATALOX LIGHT ® systems offer a new technology with advanced catalytic filtration available in water treatment industry. All systems have been engineered keeping both professionals and consumers in mind. Systems are available with different models and customized for manual backwash without using electricity or it can be made fully-automatic. System can be used in a variety of applications including residential, commercial and any process water applications for food and beverage industry. Standard systems are designed with a filtration velocity of 20 m/h (8.2 gpm/ft2) to provide a good filtration. This value may differ for advanced application like Arsenic, Radium, Uranium and otherheavy Metal removal where co-precipitation process requires higher contact time thus lower filtration velocity. Running the system at higher velocity may compromise the filtration performance. Virtually there is no flow rate limitations for KATALOX LIGHT ® systems as KATALOX LIGHT ® units can be configured in parallel to address industrial high flow requirements. Composition of Katalox Light® Compounds Typical value Specifications ZEOSORB 85 % > 85 % (Naturally Mined) Manganese dioxide 10 % > 9.5 % Hydrated Lime 5 % < 5 % Physical Properties Appearance Granular black beads Odor none Mesh size US 14 x 30 SI 0.6 – 1.4 mm Uniformity Coefficient ≤ 1.75 Bulk density US 66 lb / ft3 SI 1060 kg / m3 Moisture Content < 0.5 % as shipped Filtration < 3 micron Loading Capacity for Fe2+ alone 3000 mg / l 85000 mg / ft3 (aprx) for Mn2+ alone 1500 mg / l 42500 mg / ft3 (aprx) for H2S alone 500 mg / l 14000 mg / ft3 (aprx)

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false